根據Global Market Insights公司的一項新調研，休閑船舶涂層市場到2024年，市值預計超過19億美元。

    預測期內，亞太地區旅游業的高速增長將推動休閑船舶涂層市場的發展。亞太區是世界旅游業發展最為快速的區域，2000年旅游人數高達1.1億，2015年增至2.79億人次，到訪游客年均增長6%。聯合國世界旅游組織預計，到2030年該區域到訪游客總數或能達到5.35億人次。

    中國、泰國、香港和馬來西亞是亞太區最為熱門的四大旅游目的地，其他熱門國家還包括日本、澳大利亞和印度尼西亞等。戶外劃船休閑活動的日益風靡刺激著休閑船舶涂層市場的興起。此外，亞太區還為這項戶外休閑運動開發了諸多全新場地，成為休閑船舶涂層市場發展的一大機遇期。

    預測期內，防污和防腐產品本身的危害性也成為業內人士的一大顧慮，恐將阻礙休閑船舶涂層市場未來的發展。防污產品所含的一些有毒殺生物成分，如銅、鋅和三丁基錫，會逐漸滲入到水中。盡管這些產品在保證船舶速度和能效性上舉足輕重，但使用該類型產品卻對海洋環境造成嚴重危害。防污產品的VOC排放量也需受到嚴格管控。

    上述因素或將阻礙休閑船舶涂層市場的增長，因而涂料制造商們不得不開發一些對環境影響較小的產品，勢必帶來生產成本的上升。

    休閑船舶涂層市場的防海洋生物類產品因其環保性未來將迎來高速增長期，預測期內的復合年增長率（CAGR）將超過7.5%，今后有望取代防污類產品。防海洋生物類產品采用有機硅技術打造一個海洋生物難以附著的超滑表面。與傳統防污產品相比，具有性能更佳、綠色環保，應用方便且維護成本更低的顯著優勢，防海洋生物類產品由此在休閑船舶涂層市場脫穎而出。

    北美是休閑船舶涂料最為重要的市場之一，到2024年，將占據全球市場總份額的四分之一以上。美國和加拿大兩國有極長的海岸線，戶外劃船活動在兩國均屬于熱門運動。其中，美國是休閑船和游艇的主要制造國和出口國。劃船也深受加拿大人喜愛，因而該國也是休閑船和游艇的重要消費市場。加大拿國家船舶制造協會研發發現，每年全國有大約三分之一的人口參與該項熱門活動。這些因素推動著北美休閑船舶涂層市場的大力發展，預測期內的復合年增長率超過6.5%。

    原文

    Market for Marine Coatings for Leisure Boats Expected to Reach $1.9 Billion by 2024SHELBYVILLE, DE - According to new research by Global Market Insights Inc., the market for marine coatings for leisure boats is likely to surpass $1.9 billion by 2024.

    High growth in the Asia-Pacific tourism sector will augment development of the leisure-boat marine coatings market during the forecast period. Asia-Pacific continues to be one of the fastest growing tourism regions in the world, with tourist arrivals growing by close to 6% annually, reaching 279 million in 2015 compared to 110 million in 2000. According to United Nations World Tourism Organization, this number will likely reach 535 million by 2030.

    China, Thailand, Hong Kong and Malaysia are the most visited tourist hot spots in the region. Japan, Australia and Indonesia are also key tourist destinations in Asia-Pacific. The rising popularity of recreational boating activities by tourists in the region will spur development of the market for marine coatings for leisure boats. The region also provides a lot of unexplored destinations for recreational boating activities, which will offer ample opportunities for the leisure-boat marine coatings market to grow.

    The hazardous nature of antifouling and anti-corrosion product types is a major source of concern among industry participants and may hamper growth in the leisure-boat marine coatings market during the forecast period. Antifouling products can contain toxic biocidal compounds such as copper, zinc and tributyltin, which gradually leach into the water.

    Although, these products are of prime importance for increasing a boat's speed and energy efficiency, their use causes significant harm to the coastal environment. The use of anti-corrosion products is also regulated according to the amount of VOC emissions.

    These factors are likely to hinder growth in the market for marine coatings for leisure boats, as manufacturers will have to develop products that have lower environmental impact, which results in higher production costs.

    The foul release product segment of the leisure-boat marine coatings market will grow by a compound annual growth rate （CAGR） of more than 7.5% in the forecast period. The segment will witness high growth due to the environmental-friendly nature of the product, which is likely to replace anti-fouling products in the future. Foul-release products use silicone technologies to create a super-smooth surface that is difficult for marine life to attach to. They provide significant advantages over the traditional anti-fouling types, such as better performance, eco-friendliness, easy application, and lower maintenance, making it a popular segment in market for marine coatings for leisure boats.

    North America is the most significant market for leisure-boat marine coatings and will account for more than a quarter of the overall industry by 2024. The United States and Canada have a large coastal area, and recreational boating has been a popular activity in these countries. The United States is a major manufacturer and exporter of recreational boats and yachts. Canada also provides significant product demand, with boating being a popular hobby for its citizens. A National Marine Manufacturers Association of Canada study revealed that about a third of the country's population participates in boating each year. These factors will drive the North American leisure-boat marine coatings market, which is predicted to grow at a CAGR exceeding 6.5% in the forecast period.

更多關于材料方面、材料腐蝕控制、材料科普等方面的國內外最新動態，我們網站會不斷更新。希望大家一直關注中國腐蝕與防護網http://www.ecorr.org

責任編輯：王元

《中國腐蝕與防護網電子期刊》征訂啟事
投稿聯系：編輯部
電話：010-62313558-806
郵箱：fsfhzy666@163.com
中國腐蝕與防護網官方 QQ群：140808414